| Performance parameters |
| Model |
YL-X436 |
| Disk diameter |
400mm |
| Inside diameter of the nozzle |
IPX5(Grade) φ6.3mm; IPX6(grade) φ12.5mm |
| Rotary speed |
1-7r/min |
| Water spray pressure |
30 ~ 200kpa (Adjusted by flow rate) |
| Spray system |
It is composed of water pump, water pressure gauge and fixed nozzle support |
| Nozzle material |
Stainless steel pipe |
| Pipe diameter |
Φ16mm |
| Rainfall intensity |
≥10cm/h |
| Pendulum Angle |
±40°,60°,90°,180°,360° |
| Box material |
304 stainless steel |
Application
The main function of the equipment is to test the performance of the storage, transportation and use of the products in the rainy climate environment. The equipment is mainly used for electronic, electrical products, lamps, electrical cabinets, electrical components, automobiles, motorcycles and their parts and other products in the simulated rainy climate conditions, the physical and other related performance of the products are tested. Through the verification to determine the performance of the product is to meet the requirements, so that the product design, improvement, verification and factory inspection use.
Feature
A water tank is arranged at the bottom through the stainless steel pump inside the right control box and pressurized, and then sent to the nozzle of the top spray pipe device, the nozzle longitudinal spray water to the sample on the turntable, and then scattered to the inside of the water tank, so as to form a water circulation system. Pump outlet design flowmeter, pressure gauge, solenoid valve and other control components. The inner box is equipped with a waterproof turntable and the speed is controlled on the panel.
Standard Compliance
GB-4208-2008, GB2423.38, IPX5, IPX6 Protection grade.
GB7000.1-2008 lighting Part l: General requirements and tests
GB4208-2008 shell protection level (lP Code)
IEC60529:2001-Degrees of protection provided by enclosure(lP Code)
IEC60598-1: 2003-Luminaires-Part 1:General requirements and test
Quality Guarantee
Complete QC inspection process,Guarantee high quality of each machine.
1.IQC Incoming Quslity Control
2.IPQC InPut Process Quality Control
3.FQC Final Quality Control
4.OQC Outgong Quality Control
Our service:
If you face any problems in future during testing process we promise we will give you a reply within 48 hours and solution provide within 3 working days. We can offer operation video and English operation muanual.
Onsite Service:
1.Device installation;
2.Equipment Operation Test Technology training;
3.Equipment Calibration;
4.Daily maintenance and maintenance of equipment Free technical training for visiting factories 24-hour Online contact Free software upgrades
Free information:
1.Product Instruction;
2.Product operation instruction/video;
3.Experiment Test (test application, test report)
Device Problem Handling:
1.Social media 24 hours online communication;
2.Email contact;
3.Video Conferencing;
Packing And Shipping
FAQ
Audited Supplier 
){kind=link}
){kind=link}