Performance parameters |
Model |
HW-S80 |
HW-S150 |
HW-S225 |
HW-S408 |
HW-S608 |
HW-S800 |
HW-S1000 |
Test Space (CM) |
40×50×40 |
50×60×50 |
50×75×60 |
60×85×80 |
80×95×80 |
100×100×80 |
100×100×100 |
External Dimension (CM) |
90×136×94 |
100×146×104 |
100×161×117 |
100×181×117 |
130×181×137 |
150×186×137 |
150×186×157 |
Temperature Range |
-70~150ºC |
Temperature Fluctuation |
≤ ±0.5ºC,no load |
Temperature Deviation |
±1.5ºC |
Temperature Uniformity |
≤ 2.0ºC,no load |
Heating Rate |
From -40ºC to 80ºC,full range non-linear average about 5ºC/min(10ºC/min or15ºC/min can be customized) no load |
Cooling Rate |
From 80ºCto -40ºC ,full range non-linear average about 5ºC/min(10ºC/min or15ºC/min can be customized) no load |
Internal Material |
1.2~1.5mm thick SUS#304 high &low temperature resistance stainless steel. |
External Material |
Adopt flame retardant high strength PU Polyurethane foam insulation material. |
Control Method |
Touch screen programmable PLC, with USB interface, with RJ485 interface can be connected to computer controlling, special network control software, convenient remote monitoring, data acquisitioning. |
Compressor |
Tecumseh (France)-fully air-cooled double-fall cooling compressor. Or Bock (Germany) semi-enclosed air-cooled refrigeration. |
Safety Protection |
Explosion-proof pressure relief device, explosion-proof chain, mobile phone alarm device, networking, smoke exhaust device, fire extinguishing device, etc. |
Application
Rapid Rate Temperature Cycle Test Chamber is developed and manufactured to match the ESS (Environment Stress Screen) test. It is an ideal reliability testing and validation equipment to find out the product failure with high accelerate environment condition. Our test chambers help you to make safe and reliable products before delivering to the people who use them.
Feature
- Test Cabinet made by Seal Welding SUS #304 Stainless Steel.
- Fire Resistant High Strength PU Foam Insulation Material.
- Temperature Ramp Rate: 5°C / 10°C / 15°C per minute (Linear or Non-Linear controllable).
- Optional Function: Fume Exhaust System, Explosion-proof System.
Standard Compliance
- IEC60068-2-1:2007 (GB/T2423.1-2008) Environmental testing - Part 2: Test methods - Tests A: Cold
- IEC60068-2-2:2007 (GB/T2423.2-2008) Environmental testing for electric and electronic products Test methods - Tests B:Dry Heat
- IEC 60068-2-14 2009 Environmental testing - Part 2-14: Tests -Test N: Change of temperature
Detailed Photos
Quality Guarantee
Complete QC inspection process,Guarantee high quality of each machine.
1.IQC Incoming Quslity Control
2.IPQC InPut Process Quality Control
3.FQC Final Quality Control
4.OQC Outgong Quality Control
Our service:
If you face any problems in future during testing process we promise we will give you a reply within 48 hours and solution provide within 3 working days. We can offer operation video and English operation muanual.
Onsite Service:
1.Device installation;
2.Equipment Operation Test Technology training;
3.Equipment Calibration;
4.Daily maintenance and maintenance of equipment Free technical training for visiting factories 24-hour Online contact Free software upgrades
Free information:
1.Product Instruction;
2.Product operation instruction/video;
3.Experiment Test (test application, test report)
Device Problem Handling:
1.Social media 24 hours online communication;
2.Email contact;
3.Video Conferencing;
Packing And Shipping
FAQ